Mipa 2K Loser

Mipa 2K-Loser is a special mixture of solvents (fade-out thinner) to “melt” edges of spot repairs and fade-out areas. Mipa 2K-HS-Löser can also be used to dissolve an old paintworks (Attention: test suitability to avoid unwanted wrinkling/raising of old paintwork) in order to improve the adhesion of the subsequent coating. In this case, Mipa 2K- Löser must be applied uniformly on the old paintwork and recoated within a few minutes. Mipa 2K-Löser can be used as fade-out thinner in combination with following products:

  • Mipa AC
  • Mipa PUR
  • Mipa OC
  • Mipa 2K-MS-Klarlacke

After having applied one of these products, spray immediately Mipa 2K-Löser over the border areas (overspray areas). Melt the overspray edges with a very uniform coat of Mipa 2K-Löser until the rough overspray become visibly smooth. Do not apply too much, otherwise irregular dissolving or runs are to be expected.